Polypropylene Pump Suppliers, Non Metallic Pump
   
Call us: +91 - 98250 64876
E-Mail: info@bhagwatiengineering.com
 
   
 

Submerged Vertical Process Pump

We manufacturer of submerged vertical process pump, are presenting our rang under “Vijay” Brand name

The introduced submerged vertical process pump is invariably best bet for handling corrosive, non corrosive liquids without any failure, thanks to the PP (polypropylene) material of construction sharing excellent resistance against corrosive chemicals, makes it also illustrious as the polypropylene pump or a PP pump in the variegated industries.  Besides that, the closed type and semi open type impeller configuration augment hydraulic efficiency and reduces the thrust on rotating assembly, resulted in smooth and easy operations throughout its lifetime.

The impeller casing of this pump is completely submerged in liquid and hence eliminates requirements of the priming or air venting during the operation. Other than, the vertical design of this pump requires minimum space for the installation and makes it the best bet, even in the industries to which space is an issue. This submerged vertical process pump is available in two different designs make it suitable for inside tank installation as well as outside tank installation. The gland less and vapor sealing configuration of this type of PP pump prevent the leakage of corrosive liquids and gases and hence promote in controlling the environmental pollution too.

 

Range of Coverage
Head: Up to 40 MTRS
Flow: Up to 50 M3 /HR
Motor HP: 1HP to 7.5 HP
Material of Construction: Poly Propylene, M.S., C.I., S.S.

Operation Advantage of Submerged Vertical Process Pump:

  • No mechanical seal stuffing box required
  • All the wet parts are in P.P. & Teflon construction withstand corrosion & erosion.
  • No foot valve necessary to lift from negative suction
  • No leakage problem encountered, just like gland or mechanical seal
  • Virtually no maintenance is required
  • Easy alignment and enables easy operations

Application
"PHOSPHRIC ACID PALNT"
H3PO4, H2SIF6, H2SO4, HF AND THEIR MIXTURES

"GAS WASHING PLANT"
SCRUBBED LIQUID CONTAINING F, CL, SO2, AMMONIA

"WATER TREATMENT PLANT"
ANY TYPES OF ACIDIC WATER LIFTING

"M.S. VERTICAL PUMP"
ARE USED FOR TRANSFER OF SULPHURIC ACID 98% OLUM, CLORO, NEPTHA

 

Submerged Vertical Process Pump Exporters, Submerged Vertical Process Pump India, C.I. Vertical Submerged Pump Measurement Cum Installation

Guide from 4 "" to 10" space must be spared according to sludge or disposal/settling of partcals.

Submerged Vertical Process Pump Manufacturers
 
 
The Salient Features of Submerged Vertical Process Pump:
  • The polypropylene pump shaft is coated with PP sleeve supported in the upper segment by heavy ball bearing and in the lower part by a bearing bush and according to the shaft length. They are provided with an intermediate bush.
  • In M.S. or S.S. Pump shaft is En-8 or SS-316
  • In this pump, impeller is a semi open type hydraulically balanced by back wanes or in the case of large impeller diameters by balancing holes and ware rings both sides.
  • Reliable fixing of impeller on the shaft by direct thread
  • A heavy duty bearing bracket is equipped with this polypropylene pump
  • Centrifugal construction of this PP pump ensures noise free and vibration free operations
 
Submerged Vertical Process Pump Suppliers, SS Submerged Pump, C.I Vertical Pump After Sales Service
Our service technicans can meet you any where in india at a short notice. Spares are availavle ready stock our constant endeauour is to ensure that a "VIJAY" pump never causes you downtime once you have put it to operation.
Performence Curve
  • 2 HP/ 1440 RPM
  • 3 HP/ 1440 RPM
  • 5 HP/ 1440 RPM
  • BPE
 
   
© 2014 All Rights Reserved by
Bhagwati Engineering Works
Link Products
Home Polypropylene Horizontal Centrifugal Pump
About us Vertical Glandless Pump
Export Submerged Vertical Process Pump
Enquiry Vacuum Ejector
Contact us Mud Pumps
  Chemical Process Pump
  Cantilever Pump
  PP / FRP Venturi